How To Clean Furnace Flame Sensor. So, cleaning a furnace flame sensor regularly is very essential. 1/4 inch hex driver or wrench.
Cleaning a Furnace Flame Sensor from www.doityourself.com
The flame sensors are typically kept in place by one or two ¼” hex head screws. By removing the flame sensor and cleaning it, you can get your furnace to. Look for a rod that is placed in the path of the burner.
Following Are The Required Tools To Clean The Flame Sensor On Your Furnace.
Replace the cover over the blower compartment and turn on the power. See the summary of this article in an infographic here. Not all models will allow you to remove.
Although, Most Furnaces Are Located In Basements And Attics So Tends To Be A Lot Of Dust In The Air.
How to clean flame sensor? Connect the power and see if everything is okay or not. The flame sensor is a safety component of a furnace located on the interior of the burner assembly.
By Removing The Flame Sensor And Cleaning It, You Can Get Your Furnace To.
From this post, you can learn how to clean a flame sensor and make your task easier. The sensor can be cleaned with a vacuum cleaner or a brush. How to paint kitchen cabinets.
The Furnace Flame Sensor Helps Prevent Explosions That Could.
As long as the component senses the flame, it sends a message to the main furnace control board telling it to keep the main burner on and the gas valve open. To test a flame sensor, follow these steps: Unscrew the single screw holding the sensor to the burner housing using a phillips screwdriver or a socket wrench depending on which type of screw head it has.
Once Inside The Burner Area, The Flame Sensor Is A Thin Metal Rod With A White Porcelain Base.
The sensor is typically attached towards the rear of the furnace. Remove the cover over the combustion chamber. A furnace flame sensor is a device that senses the presence of a flame in the furnace.
Location:
Share :
Post a Comment
for "How To Clean Furnace Flame Sensor"
Post a Comment for "How To Clean Furnace Flame Sensor"